加入收藏 | 联系我们

联系我们

MORE

地 址:无锡市滨湖区华庄镇黄巷振兴路13号    

总经理:董君琰
手   机:15261500062  
电   话:0510-85959675
传  真:0510-85955979

反应釜www.wfanyingfu.com

邮   箱:web@wuxisy.com

新闻中心

电加热反应釜的维护及故障排除方法

作者:admin    访问量:2007    发布时间:2016-06-02

电加热反应釜的维护:

Maintenance of electric heating reactor www.wfanyingfu.com:

 

1、 电加热反应釜应严格按产品铭牌上标定的工作压力和工作温度操作使用,以免造成危险。

1, electric heating reactor should be in strict accordance with the product nameplate on the calibration of work pressure and temperature operation, so as to avoid the danger.

 

2、 电加热反应釜严格遵守产品使用说明书中关于冷却、注油等方面的规定,做好设备的维护和保养。

2, electric heating reactor is strictly comply with the product specification on cooling, oil and other provisions, do a good job in the maintenance of the equipment.

 

3、 电加热反应釜所有阀门使用时,应缓慢转动阀杆(针),压紧密封面,达到密封效果。在关闭的时候不能用力过猛, 以免损坏密封面。

3, electric heating reactor all valves should be used, should slow the rotation of the valve stem (needle), press the cover, to achieve the sealing effect. Can not be forced to close the closure of the fierce, so as not to damage the sealing surface.

 

4、 电加热反应釜电气控制仪表应由专人操作,并按规定设置过载保护设施。

4, electric heating reactor electrical control instruments should be operated by hand, and the provisions set overload protection facilities.

 

电加热反应釜故障排除:

Trouble shooting of electric heating reactor:

 

1、 密封面处出现泄漏时将螺杆重新上紧,重新修磨抛光密封面。

1, sealing surface leakage will re tighten the screw, re grinding and polishing the sealing surface.

 

2、 阀门处出现泄漏时维修、更换阀杆(针)、阀口。

2, valve leakage occurs when the repair, replacement of the stem (needle), the valve port.

 

3、 外磁钢旋转,内磁钢不转,电机电流减小时通知供货商,重新更换内磁钢。

3, outside the magnet rotates, the magnet motor does not turn, decreasing current to notify the supplier, to replace the magnet.

 

4、 磁力耦合传动器内有摩擦的噪音时与供货商联系,更换轴承、轴套。

4, magnetic coupling in friction noise when contact with suppliers, replacement of bearings, bushings.

上一篇:没有了
keywords:反应釜 反应釜